Making Picture Frames Match

 Hello Readers. I had a hodge-podge of picture frames that I wanted to use on one wall. I wanted them to coordinate and look intentionally put together. But they were all very different and did not match each other at all. I was not going to go out and buy all new frames, I knew I could make this work. 

I made this look like a planned collection of pictures in frames. Let me show you what I did. 

Here are the picture frames. There were brown wood frames, a gold frame, a silver frame and one picture with no frame at all. I picked one color to tie them together. Gold was the color that I focused on. I also did a few more things to connect all the frames.

This picture also shows the first way I tried to make a unified look. All these pictures are old looking. They all have a black and white or sepia color scheme. This helps make this whole group look more put together. 

This is the wall I want to hang these pictures on. There are 2 control panels on this wall. One we use a lot. One we only need to use if the alarm goes off. I thought the whole wall would look better if I could cover it up. I had an idea for that.

One of the pictures was almost like a box. I thought I could remove the back and the picture could hang over and cover the control panel. 

I used a thin knife to pry the back loose from the picture and remove it. 

That made the folds of the sides of this picture start to unfold. That was a problem. But it was OK, I had a plan.

I used some gold Duck Tape. Gold was going to be my unifying color. 

I wrapped the gold tape around all 4 sides of this picture. I wanted the color of the tape but I also wanted the tape to hold the sides in place. This worked well. 

The tape was wider that the sides of the picture so I folded the tape towards the back and pressed it down so it would hold secure. 

I simply hung this picture on the control panel. It was very light weight so it will not cause damage. I can lift it off in a second if I need to get to that control panel. 

That control panel is totally hidden. But still accessible. 

I want to highlight the color gold so I used some gold paint. This "Rub'n Buff" is like a thick paint. It can be applied on and it never drips. 

I used a sponge applicator so I could rub the paint on the frames. I wanted a thin coat that would tone down the original colors of the frames. I didn't mind if the original color showed through a little. The sponge let me apply a very thin coat. 

I painted this wooden frame with the gold paint. The roughness of the wood still shows through but the gold is dominant and will tie this frame in with the others. I let this dry over night. 

I used the gold paint on this silver frame too. I applied the gold to the sides to hide the silver a little. I let this dry over night too.

 

I started to hang the frames. I did not use a level or a stud finder. These pictures are not heavy enough to need to be hung in a stud or need a special anchor. I just eyed the pictures and marked the top center of the frame. 

Then I put in a nail where I thought the frame needed to be hung. I wasn't trying to make a precise alignment of pictures. This arrangement was not symmetrical and that helped because it did not have to be exactly even anywhere.

My new picture wall is fun and looks good all put together. Thanks for reading along, now go make something fun for yourself.